Avtron Encoders is uniquely positioned to serve Crane & Hoist applications with deep industry experience. We know what makes encoders break and we engineer to overcome!
Whether it is wide-gap bearingless designs to overcome excessive runout or vibration or robust metal enclosures to protect against impact we design and manufacture our encoders to ensure your uptime. We support long cable runs. Our electronics are fully potted. And our magnetic sensing technology is impervious to humidity, dust and other contaminants.
All Encoders Are Not the Same Please take a closer look at what we have to offer.
HS35A
Replaces Competitive Models without Rewiring
Wide-Gap Technology: up to 8X larger gap between sensor and rotor
P65/Nema 4, 13 Rating: Dust and Liquid Tight
Superior Bearings and Seals
-20° C to + 100° C Operation
HS35M
Magnetic Durability
Replaces Competitive Models without Rewiring
No Solder industrial EPIC Connector Available
Fits end of shaft and through shaft applications
High Power Outputs Available
HS45
Magnetic Durability, Worldwide Compatibility
Cast aluminum heavy duty housing
3–5X heavier duty bearings
All electronics fully encapsulated
Mechanical Overspeed Switch Option
Visit our Crane & Hoist page for additional information regarding
our range of encoder solutions
With the latest software update for our VISOR® Robotic vision sensor, we make the setup of robotics applications even simpler and more flexible with most robot brands.
Robotics are now even easier Hand-eye calibration
The sensor’s field of view during calibration does not have to be identical to the robot’s subsequent operating range – which means you can “calibrate here and work there”.
Base-eye calibration
Suited to applications in which the vision sensor is mounted on a stationary element – for example for the precise positioning of components in the gripper.
From 2D to 3D
With the new detector 3D contour, we transform a 2D camera into 3D and give you the flexibility to check for position in all 6 axis.
Tek-Sub 4800 Submersible Level Transmitters are designed to measure the liquid and slurries Level, along with monitoring the level of fluids. These devices have high precise piezoresistive sensor, stainless steel body, and waterproof cable, which makes them suitable for long term ideal service. Easy to install, clean, and almost no maintenance.
Tek-Sub 4800A uses a high-quality ceramic pressure sensor packaged with PTFE housing that gives corrosion resistance in fluids.
Tek-Sub 4800B is designed to measure the liquid and slurries Level, including a high precise piezoresistive sensor that offers accurate and reliable level measurement in numerous applications.
Tek-Sub 4800C Borehole is 19 mm diameter, perfect for narrow conduit installation. The piezoresistive sensor is placed in a slim outer body that fits into boreholes, wells, and slender pipes.
Tek-Sub 4800D has clog-free silicon piezoresistive sensor regulating liquid level without being affected by debris, manufactured for precise real-time level measurement with several standard outputs.
Features
Temperature-compensated.
Completely sealed, stainless steel.
Highly durable with low maintenance.
Factory calibrated with easy installation.
Measuring Pressure range:Tek-SUB 4800A: 3 psig to 15 psig (2 mH2O to 10.5 mH2O).Tek-SUB 4800B and Tek-SUB 4800D: 5 psi to 20 psi (3.5 mH2O to 14 mH2O), Optional ranges available.Tek-SUB 4800C: 10 psi to 50 psi (7 mH2O to 35 mH2O), Optional ranges available
LOGAN, UT – Automation Products Group, Inc. (APG) introduces the new Series PT-405 Explosion Proof, Heavy Duty Pressure Transducer.
The PT-405 offers unbeatable performance in harsh conditions and hazardous locations. The PT-405 carries a Class I, Division 1, Explosion Proof rating from CSA, an IP65 rated case, and single seal construction for the highest safety factor. With ranges up to 30,000 psi, and outputs including 4-20 mA, 0-5 or 0-10 VDC, and RS-485/Modbus RTU, the PT-405 is as versatile as it is tough.
Like the Intrinsically Safe PT-400, the Explosion Proof PT-405 has screws for manual, field-adjustable Zero and Span settings. Incoloy process connections, for use with pressure ranges above 10, 000 psi, are NACE MR-01-75 and ISO 1516-3 compliant. PT-405 transducers with Modbus output are Tank Cloud compatible.
Features of the Series PT-405 include:
Pressure ranges up to 30,000 psi
Outputs: 4-20 mA, 0-5 and 0-10 VDC, and RS-485/Modbus RTU
Class I, Div 1, Groups C & D, T4, Explosion Proof (all ranges, all outputs)
Field-adjustable Zero and Span
Single Seal
About Automation Products GroupAutomation Products Group, Inc. (APG) is a supplier of innovative and differentiated products, solutions, and services for industrial process measurement and control. Technologies include pressure, flow, level control, analytics, and dedicated flexible control, using state of the art methodologies. Our customers include OEM’s, integrators, distributors and end users. APG’s goal is to provide reliable products and solutions supported with exceptional customer service.
Media Contact: APG Sales, sales@apgsensors.com, 1-888-525-7300
Tek-Trol took part in CSHM tradeshow held at Calgary on 21 & 22nd of March 2017
CSHM (Canadian School of Hydrocarbon Measurement) organizes a table-top tradeshow every year that invites experts in the field of measurement to give sessions about new and existing technologies and regulatory requirements. This year Tek-Trol also took part in this event.
Accuracy:
